KERNEL [CF-Root 4.1] JP*,JS*,JQ3,JV1/K/B/H/O,JVI/P/Q/R/S – su+bb+2e/CWM – rfs+ EXT4 12/09/2011 UPDATE

This rooted kernel is for the “rooting beginners” and those who want to keep as close to stock as possible. CF-Root takes the kernel from an original Samsung firmware, and just adds root, busybox, and (unprotected recovery and CWM compatibility) OR (CWM3)

If you are looking for highly optimized kernels or kernels that perform specific functions, look elsewhere. All CF-Root’s are based on original Samsung kernels, they are NOT recompiled, and thus ensure maximum compatibility.

THIS IS NOT A ROM – it is only a kernel. You need to have a firmware already on your device. You do NOT need to wipe anything for this patch. You DO need to read the instructions.

MAKE SURE YOUR PHONE CAN ENTER DOWNLOAD MODE USING THE KEYCOMBINATION WHILE BOOTING BEFORE FLASHING CF-ROOT (or anything, really)

Donate
There have now been over 200.000 downloads of CF-Root for various devices, and many more if you include ROMs, kernels, etc that use it. Don’t be a leech, buy me a beer (and use the “Thanks” button!)

Features
– The kernel is fully stock and taken from the original firmware, with just the following added:
– Root
– Superuser 2.3.6.1
FROYO ( CF-Root < 2.4 versions )
—- Busybox 1.15.3 or 1.17.1 (if not mentioned in the filename it is 1.15.3)
—- “2e” recovery (can flash unsigned update.zip’s)
—- Integrated fix for ClockworkMod’s nandroid (2.5.0.4+)
GINGERBREAD ( CF-Root >= 2.4 versions, JVK and newer )
—- Busybox v1.16.2androidminimal (from CWM)
—- Integrated CWM 3.0.0.5 / RFS

Instructions (short)
– Flash CF-Root-xxx-vX.X.tar (from the attached zip) as PDA in ODIN, without repartition. Done.

Instructions (long)
Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
– Unzip the attached CF-Root-xxx-vX.X.zip
– (USB) Disconnect your phone from your computer
– Start ODIN
– Click the PDA button, and select CF-Root-xxx-vX.X.tar
– Put your phone in download mode
– (USB) Connect the phone to your computer
– Make sure repartition is NOT checked
– Click the START button
– Wait for the phone to reboot
– Done (if it took you more than 30 seconds, you need practise!)

Instructions (alternative if you are already running CF-Root 2.5 or newer)
– Copy the zip file to your SD card
– Stop sharing SD card with computer over USB, unplug the cable, etc
– Applications -> CWM -> Flash kernel. Select the ZIP file on your SD card.
– Done

 

Questo kernel ROOTATO è per i “Rooting principianti” e per tutti quelli che vogliono mantenere il sistema  il più vicino possibile a quello originale . CF-Root prende il kernel da un firmware originale Samsung, e aggiunge solo root con SuperUser , busybox, ed installa  la Recovery ClockWorkMode3

Verificare che il telefono  entri in Download Mode  tramite la COMBO DEI TRE TASTI durante l’avvio prima di flashare CF-ROOT.

Premere contemporaneamente rispettando la sequenza il tasto VOLUME GIU’ + il tasto centrale HOME + il tasto POWER e rilasciare dopo 3 secondi circa.  Se avrete effettuato correttamente la procedura vi ritroverete il dispositivo in Download mode :

Istruzioni (brevi per i più esperti) :
– Flashare il  CF-Root-xxx-vX.X.tar (estratto dallo zip scaricato) e non dovrete far altro che Aprire ODIN e cliccare su  PDA  senza ripartizione. START

Istruzioni per i meno esperti :

– Seguire le istruzioni alla lettera. Non toccare alcun tasto o caselle di controllo che non sono elencati di seguito !
– Decomprimere il file scaricato CF-Root-xxx-vX.X.zip
– (USB) Scollegare il telefono dal computer
– Avvio ODIN
– Fare clic sul pulsante PDA, e selezionare CF-Root-xxx-vX.X.tar
– Mettere il telefono in modalità download
– (USB) Collegare il telefono al computer
– Assicurarsi che  la casella REPARTITION 
NON sia selezionata
– Fare clic sul pulsante START
– Attendere che il telefono al riavvio
– Fatto .

Di seguito il link a Thread ufficiale su XDA : [CF-Root 4.1] JP*,JS*,JQ3,JV1/K/B/H/O,JVI/P/Q/R – su+bb+2e/CWM – rfs+ext4

File Type: zip CF-Root-XX_UNK_JVQ-v3.7-CWM3RFS.zip

 

File Type: zip CF-Root-XX_OXA_JVR-v4.1-CWM3RFS.zip

 EXT 4 per la conversione dei files da ” rfs <=> ext4 ” e rendere così molto più veloce il vostro Galaxy S

 

File Type: apk CF-Root-ext4-v1.3-Addon.apk

 

new udateeeeee jvs :

File Type: zip CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip

About Alasth